Where should I install the B200?

location:

• The ambient temperature around the transceiver should be
  maintained between -25°C and +55°C.
  The transceiver should not be located in a flammable or
  hazardous atmosphere, such as in an engine room or near to
  fuel tanks.
• The transceiver must be fitted in a location where it is at least
  0.2m from a compass or any magnetic device.
  The transceiver should be mounted in a location where the
  LED indicators are readily visible as they provide important
  information on the status of the transceiver.
• WiFi & Bluetooth will benefit from the B200 being installed
  near the center of the boat to provide a consistent signal
  across all areas. The construction of your vessel can also have
  an impact on performance. For example, metal structural bulk
  heads and roofing, power cables and reflective surfaces can
  reduce, and in certain situations block, the signal. Consider
  testing the reception to ensure you’re happy before you
  mount the transceiver.
• For optimum performance the transceiver should be mounted
  at least 0.5m away from other high power transmitting
  equipment like VHF radios.
• There should be adequate space around the transceiver for
  routing of cables.