If you’re using the default Wi-Fi configuration on your B922/B924 it will be identified as 'em-trak' on the latest version of the Navionics Boating app.
Otherwise, please follow the steps below to add the B922/B924 manually:
- Connect to your AIS SSID from your Android or iOS Wi-Fi Settings page
- Enter the password when prompted (the default is emtrakais). This can be checked when connected to proAIS2 on the Wi-Fi tab.
- Once connected, open up the Navionics app
- Next select Menu on the Navionics app
- Select Paired Devices
- At the bottom of the page select ADD DEVICE
- Under TCP enter a name
- Enter your Host (IP address)
- Enter your Port number
- Click Save
The app should start receiving data
Note: You will also need to enable Location and Local Network in the Navionics app settings.
0 Comments